120-volt warning: Disconnect power before removing receptacles or covers. Hot, melted, buzzing or burned wiring requires qualified electrical service.

Start upstream

Confirm the pedestal or household source is powered and safe. Then reset the RV main breaker and branch breaker fully off and back on. A breaker can look centered but still be tripped.

Find every GFCI

Check bathroom, kitchen, exterior bay, wet bay, basement, under-cabinet and refrigerator-area outlets. One GFCI can protect outlets that seem unrelated. A GFCI usually needs incoming power before it will reset.

Unplug loads before reset

Unplug appliances and cords from the dead circuit. If the GFCI resets with everything unplugged but trips when one device is connected, that device or location may be the fault.

Check wet exterior outlets

Exterior receptacles and compartment outlets see rain, washing and condensation. Dry them fully, inspect covers and do not bypass protection. Recurring trips after rain often mean moisture intrusion or failed receptacle seals.

Remember inverter outlets

Some outlets are powered through an inverter or inverter/charger. Look for reset buttons or output breakers on the inverter and understand which outlets are on that circuit.

When the GFCI will not reset

No incoming power, a failed GFCI, reversed line/load wiring, downstream ground fault or damaged cable can prevent reset. If basic source and breaker checks do not restore power, stop before disassembling live circuits.

Related articles

Match the pattern: dead outlets with lights working, or dead lights with outlets working.

Lights work, outlets don’t →GFCI won’t reset

Sources and editorial notes

Follow RV electrical-panel labels, inverter manuals and GFCI device instructions. This guide is educational and does not authorize unqualified live electrical work.